Product Overview
The WattPower Integrated Power System unifies the AC power system, DC power system, UPS power system, and communication power system into a single, coherent platform — designed, manufactured, commissioned, and maintained as one integrated solution.
With a unified external interface and standardized cabinet appearance, the system dramatically simplifies substation auxiliary power architecture. Equipped with an intelligent monitoring system supporting IEC 61850 and full digital communication, it provides real-time visibility, fault diagnosis, and centralized management across all power subsystems.
Key Features
- Unified System Design — AC, DC, UPS, and telecom power systems integrated into one unified platform with harmonized cabinet design and external interfaces
- Simplified Substation Architecture — Dramatically reduces substation auxiliary power complexity with standardized centralized power management
- Intelligent Unified Monitoring — Single monitoring platform for all power subsystems with 7-inch touchscreen HMI, real-time status, and fault location display
- IEC 61850 & Digital Communication — Full IEC 61850 protocol support for substation automation integration, with MODBUS and IEC 60870-5-103 backup
- Unified Commissioning & Maintenance — Single-point commissioning, maintenance, and lifecycle management — significantly reduces OPEX
- Comprehensive Protection — Full overload, short-circuit, surge (Class C), and reverse-polarity protection across all integrated subsystems
Technical Parameters
| Integrated Power System | |
|---|---|
| AC Power Module | |
| AC Input Voltage | 380V AC ±15%, 3Ph+N+PE |
| AC Output Voltage | 380V AC / 220V AC (configurable) |
| Rated AC Current | 200A ~ 4000A (configurable) |
| Short-time Withstand Current | 100kA (1s) |
| AC Protection | Overload, short-circuit, Class C surge, isolation |
| DC Power Module | |
| DC Output Voltage | 220V DC / 110V DC (configurable) |
| DC Output Current | 10A ~ 200A (configurable, N+1 redundant) |
| Rectifier Module Efficiency | ≥94% |
| DC Voltage Regulation | ≤±0.5% |
| Battery Type | VRLA (AGM/GEL) / LFP (optional) |
| Battery Capacity | 20Ah ~ 300Ah (configurable) |
| UPS Power Module | |
| UPS Capacity | 10kVA ~ 200kVA (configurable) |
| UPS Topology | Double-conversion online |
| Output Power Factor | 0.9 / 1.0 |
| Transfer Time (bypass to inverter) | 0ms (online double-conversion) |
| Battery Backup Time | Configurable per load requirement |
| Telecom Power Module | |
| Output Voltage | 48V DC / 24V DC (configurable) |
| Output Current | 30A ~ 600A (configurable, N+1 redundant) |
| Rectifier Module Efficiency | ≥94% |
| Monitoring & Communication | |
| Monitoring Interface | 7-inch color touchscreen HMI (unified) |
| Communication Ports | RS485 / RS232 / Ethernet (unified) |
| Supported Protocols | IEC 61850 / MODBUS / IEC 60870-5-103 |
| Alarm Output | Dry contact (NO/NC), audible & visual alarm |
| General Data | |
| Ingress Protection | IP30 / IP40 (optional) |
| Operating Temperature | -10°C ~ +50°C |
| Relative Humidity | ≤90% (at 25°C, non-condensing) |
| Altitude | ≤2000m |
| Cabinet Types Supported | GCK / GCS / MNS / GGD (AC section) |
Core Advantages
Unified System Architecture
- AC + DC + UPS + Telecom in one platform
- Unified external interfaces & cabinet design
- Harmonized appearance & cabling
- Single-point commissioning & acceptance
Unified Intelligent Monitoring
- Single HMI for all power subsystems
- Real-time status visualization
- Fault location across all modules
- Centralized event logging & diagnosis
IEC 61850 Ready
- Full IEC 61850 protocol support
- Seamless substation automation integration
- MODBUS & IEC 60870-5-103 compatible
- Digital communication across all modules
Simplified Operation & Maintenance
- Unified operation procedures
- Single maintenance window for all systems
- Reduced spare parts inventory
- Significantly lower OPEX
Comprehensive Protection
- Full protection across all subsystems
- Class C surge protection (AC & DC)
- Multi-level monitoring & alarm system
- N+1 redundancy for critical modules
Standardized & Modular Design
- Standardized cabinet form-factor
- Modular hot-swappable rectifiers
- Flexible capacity expansion
- Broad cabinet type compatibility
Application Scenarios
Smart Substations (IEC 61850)
Data Centers
Industrial Plants
Infrastructure & Utilities
Railway & Transit
Commercial Buildings
Hospitals & Healthcare
Telecom & Communication
Integrate Your Substation Power Systems?
Contact our engineering team for a unified power system design tailored to your substation or industrial facility.
Contact Us Now
Email: sales@wattpower.com.cn | WhatsApp: +86 15916287178